 |
BMSHP 600 / 650 / 750 / 1200 ALL YEAR BANDITS.
SINGLE HIGH LEVEL PIPE WORK COMES WITH HEEL PLATE, BRACKETS & CLAMPS.
EVERYTHING YOU NEED TO FIT STRAIGHT AWAY INCLUDING THE COLLECTOR GASKET. FITS FROM THE COLLECTOR TO
THE CAN. RETAINS REAR FOOTREST HANGERS EVEN ON
THE '95-'99 GSF600. MADE FOR SLIP ON CANS 2" O/D (EXTRA). WHEN ORDERING
REMEMBER TO TELL US WHICH MODEL AND CC BIKE YOU HAVE TO ENSURE WE SEND THE
CORRECT PIPE AND FIXING KIT TO YOU. |
£80.85 |
| |
|
|
 |
BMSSP1250 BANDIT 1250 K7- SINGLE
STANDARD LEVEL LINK PIPE. NON CUT ALLOWS YOU TO ADD AN AFTERMARKET SLIP ON
2" CAN TO YOUR BIKE. FITS IN THE STANDARD LEVEL POSITIONING. (CAN NOT
INCLUDED) INCLUDES CENTRE STAND STOP. |
£42.54 |
| |
|
|
|
|
BMSSP1250+CAN BANDIT 1250 K7- SINGLE
STANDARD LEVEL LINK PIPE WITH STAINLESS OVAL ROAD LEGAL "TEN 91 V" CAN (RE-MOVEABLE BAFFLE)
NON CUT. INCLUDES CENTRE STAND STOP. |
£143.83 |
| |
|
|
 |
BMSHP1250 BANDIT 1250 K7- SINGLE HIGH
LEVEL PIPE WORK COMES COMPLETE WITH HEAL PLATE AND FIXING KIT. RETAINS REAR
FOOTREST HANGER. NON CUT MADE FOR 2" SLIP ON CANS. (CAN EXTRA) NOTE CENTRE
STAND REMOVAL IS REQUIRED. |
£63.82 |
| |
|
|
 |
BMSHP1250+CAN BANDIT 1250 K7- SINGLE
HIGH LEVEL PIPE WORK COMPLETE WITH HEAL PLATE AND FULL FIXING KIT. INCLUDES
A STAINLESS OVAL ROAD LEGAL "TEN 91 V" (RE-MOVABLE BAFFLE) SLIP ON CAN. EVERYTHING YOU
NEED TO GO STRAIGHT ON. NOTE CENTRE STAND REMOVAL IS REQUIRED. |
£157.45 |
| |
|
|
 |
BMTHP 600 / 750 / 1200 ALL YEAR BANDITS TWIN HIGH
LEVEL PIPE WORK COMES WITH HEEL PLATES, BRACKETS & CLAMPS. COMES WITH
THE GAUZE COLLECTOR GASKET TOO. NOT
AVAILABLE FOR GSF600 '95-'99. 600 / 750 / 1200 USES 15MM SPACERS SO
RETAINS THE REAR HANGERS. CENTRE STAND MUST BE REMOVED. MADE FOR SLIP ON CANS 2" O/D
(EXTRA). WHEN ORDERING REMEMBER TO TELL US WHICH MODEL AND CC
BIKE YOU HAVE TO ENSURE WE SEND THE CORRECT PIPE AND FIXING KIT TO YOU.
|
£148.94 |
| |
|
|
 |
BMSHPSV SV650 ALL YEARS SINGLE
HIGH LEVEL PIPE WORK. COMES WITH HEEL PLATES, BRACKETS AND CLAMPS.
EVERYTHING YOU NEED TO FIT STRAIGHT ON. YOUR SYSTEM DOES REQUIRE CUTTING
TO FIT THE HIGH LEVEL AND FULL INSTRUCTIONS ARE INCLUDED. MADE FOR 2" O/D SLIP ON CANS
(EXTRA).
WHEN ORDERING REMEMBER TO TELL US WHICH MODEL AND CC BIKE
YOU HAVE TO ENSURE WE SEND THE CORRECT PIPE AND FIXING KIT TO YOU.
|
£55.32 |
| |
|
|
 |
BMTSP12 GSF1200 ALL YEARS TWIN
STANDARD LEVEL PIPE WORK. COMES COMPLETE WITH MOUNTING BRACKETS AND READY
TO FIT STRAIGHT ON. MADE FOR SLIP ON CANS 2" O/D (EXTRA)
COMES WITH THE GAUZE COLLECTOR GASKET TOO.
|
£127.66 |
| |
|
|
 |
BMSTDP BANDIT 600 / 650 / 750 /
1200 STANDARD LEVEL PIPE WORK. HAS THE CENTRE STAND BRACKET. MADE FOR SLIP
ON CANS 2" O/D AND COMPLETELY BAFFLE FREE. COMES WITH THE GAUZE
COLLECTOR GASKET. WHEN ORDERING REMEMBER TO TELL US WHICH MODEL AND CC BIKE
YOU HAVE TO ENSURE WE SEND THE CORRECT PIPE TO YOU. |
£55.32 |
| |
|
|
 |
BMEXTREME EXTREME LEVEL LINK PIPE FOR
THE BANDIT 600 MK2/3 AND THE BANDIT 1200 MK1/2/3. COMES COMPLETE WITH FIXING
KIT AND COMES WITH THE GAUZE COLLECTOR GASKET. REALLY GETS THAT CAN KICKED INTO THE AIR. COOL LOOKING! |
£63.83 |
| |
|
|
 |
BMGSRCANS GSR600 CANS WITH BRANCH
LINK. GETS RID OF THAT STRANGE SILENCER BOX UNDER THE TAIL WITH ONE OF THE
NEATEST SYSTEMS OUT THERE. THE CANS ARE "TEN 91 V" WHICH ARE BSAU MARKED. THE SYSTEM COMES COMPLETE WITH
MOUNTING BRACKETS, LASER CUT GSR CAN STRAPS AND HEATSHIELDS FOR THE
BODYWORK. FULL INSTRUCTIONS INCLUDED. |
£246.81 |
| |
|
|
 |
BMGSRCANS+DECAT GSR600 CANS WITH
BRANCH LINK AND DECAT PIPE WORK. EVERYTHING FROM THE COLLECTOR BACK AND GETS
RID OF THAT STRANGE SILENCER BOX UNDER THE TAIL WITH ONE OF THE NEATEST
SYSTEMS OUT THERE. THE CANS "TEN 91 V" WHICH ARE BSAU MARKED. THE SYSTEM COMES COMPLETE WITH MOUNTING BRACKETS,
LASER CUT GSR CAN STRAPS AND HEATSHIELDS FOR THE BODYWORK. FULL INSTRUCTIONS
INCLUDED. |
£340.43 |
| |
|
|
 |
BMBSA-3 3 BOLT FIXING ADAPTOR FOR TURNING YOUR
1200 BOLT ON CAN INTO A SLIP ON CAN
|
£15.31 |
| |
|
|
|
|
BMBSA-4 4 BOLT FIXING ADAPTOR
FOR TURNING YOUR SV1000 / TL1000 CAN INTO A SLIP ON CAN
|
£15.31 |
| |
|
|
 |
BMCOLLREP THE FAMOUS BANDITMANIA
COLLECTOR BOX REPAIR.
YOU DON'T NEED TO GO TO THE EXPENSE OF
REPLACING THE FULL EXHAUST. WE CAN REPAIR THE COLLECTOR AND THE
INTERMEDIATE PIPE BY CUTTING OFF ALL THE ROT AND RE-WELDING WITH
STAINLESS. WE USE JIGS TO ENSURE THE PIPE WORK IS REPAIRED AT THE CORRECT
ANGLE. THE REPAIR COMES BACK TO YOU WITH A STAINLESS HEAT SHIELD AND
CLAMP, EIGHT STAINLESS HEADER BOLTS, THE HEADER GASKETS AND THE
GAUZE COLLECTOR GASKET !! IN FACT EVERYTHING YOU NEED TO PUT THE EXHAUST
SYSTEM BACK ON YOUR BIKE. (IF YOU REQUIRE
THE HEAT SHIELD AND CLAMP, HEADER BOLTS AND GASKETS ARE AVAILABLE
SEPARATELY SEE BELOW) WE NEED YOUR NAME ADDRESS AND DAYTIME CONTACT NUMBER
IN THE BOX WHEN YOU SEND YOUR EXHAUST IN, WE CONTACT YOU FOR THE PAYMENT
DETAILS! WE NORMALLY WELD ON A TUESDAY AND WEDNESDAY AND WILL ENDEAVOUR TO
GET YOUR SYSTEM BACK TO YOU BY THAT WEEKEND. THE RETURN CARRIAGE WHICH IS AN
INSURED NEXT DAY COSTS £10.00+VAT. YOU DO NOT NEED TO BOOK IN, JUST SEND
YOUR PIPES TO US.
|
£73.83 |
| |
|
|
|
|
BMHSC REPLACEMENT STAINLESS
HEAT SHIELD AND CLAMP
FOR THE COLLECTOR
|
£12.76 |
| |
|
|
 |
BMCOLGS COLLECTOR GASKET. SITS
IN THE COLLECTOR AREA WHERE THE INTERMEDIATE PIPE GOES IN.
|
£10.00 |
| |
|
|
| |
BMHDGS HEADER GASKETS. SET OF 4
|
£6.80 |
| |
|
|
| |
BMHDBLT STAINLESS HEADER BOLTS
SET OF 8
|
£10.21 |
| |
|
|
 |
BMSSHEAD BANDITMANIA
STAINLESS HEADER PIPES FOR THE GSF1200 / GSF750 / GSF650 / GSF600.
COMES WITH 8 STAINLESS HEADER BOLTS AND THE 4 HEADER GASKETS AND STANDARD
LEVEL INTERMEDIATE PIPE.
EVERYTHING YOU NEED TO BOLT ON STRAIGHT AWAY. THIS SYSTEM LOOKS THE BIZ !!
WILL GIVE YOU BETWEEN 8-14BHP JUST BOLTING IT ON AS A RULE DEPENDING ON END
CAN AND THE FUEL / AIR MIXTURE SET UP.
|
£195.75 |
| |
|
|
 |
BMSSHEAD400 BANDITMANIA
STAINLESS HEADER PIPES FOR THE GSF400 '89-'98.
COMES WITH 8 STAINLESS HEADER BOLTS AND THE 4 HEADER GASKETS AND STANDARD
LEVEL INTERMEDIATE PIPE FOR SLIP ON CAN (2"). EVERYTHING YOU NEED TO
BOLT ON STRAIGHT AWAY. SPOT ON
SYSTEM, SPOT ON PRICE! JUST WHAT THE 400 WAS CRYING OUT FOR AND THIS QUALITY
ITEM IS THE BEST OUT THERE. |
£169.37 |
| |
|
|
|
|
BMSYSCOMP COMPLETE STAINLESS SYSTEM
FOR THE BANDIT 400 AND 600 MK1/2/3 AND THE 1200 MK1/2/3 . THE FULL EXHAUST SYSTEM
INCLUDES A STAINLESS OVAL "TEN 91 V" ROAD LEGAL CAN AND THE PIPE WORK
COMES WITH ALL GASKETS BRACKETS AND CLAMPS NEEDED TO INSTALL IN ONE HIT!!
PIC SHOWS THE 400 SYSTEM |
£340.43 |
| |
|
|
 |
BMSV1THP BANDITMANIA STAINLESS TWIN
HIGH SYSTEM FOR THE SV1000. COMPLETE KIT INCLUDING FRONT PIPE. NO CUTTING
INVOLVED!! ALL BRACKETS, SPACERS AND BOLTS INCLUDED TO GO STRAIGHT ON. MADE
FOR SLIP ON CANS (CANS EXTRA) FITS A TREAT, SOUNDS A TREAT!! THERE'S NO
OTHER SYSTEM OUT THERE BEEN DEVELOPED LIKE THIS ONE. AWESOME!! |
£212.77 |
| |
|
|
 |
BMDBK DB KILLER. ALREADY GOT A
RACE CAN FITTED? WOULD YOU LIKE YOUR CAN TO SOUND A BIT MORE NEIGHBOUR
FRIENDLY? THEN THIS IS FOR YOU! NOT ONLY DOES IT KNOCK OFF THE OBVIOUS
RASP OF A RACE CAN, IT ALSO LOOKS LIKE YOU HAVE A BAFFLED CAN ALTHOUGH IT
IS NOT BSAU MARKED.
|
£18.72 |
 |
STRAPB LASER CUT SHORT EARED CAN
HANGER, HAS BANDIT LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER
DAMPING STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS.
REMEMBER TO TELL US ROUND OR OVAL!!
|
£12.76 |
 |
STRAPH LASER CUT SHORT EARED CAN
HANGER, HAS HONDA LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER DAMPING
STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS REMEMBER
TO TELL US ROUND OR OVAL!!
|
£12.76 |
 |
STRAPK LASER CUT SHORT EARED CAN
HANGER, HAS KAWASAKI LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER
DAMPING STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS
REMEMBER TO TELL US ROUND OR OVAL!!
|
£12.76 |
 |
STRAPS LASER CUT SHORT EARED CAN
HANGER, HAS SUZUKI LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER
DAMPING STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS
REMEMBER TO TELL US ROUND OR OVAL!!
|
£12.76 |
|
|
STRAPT LASER CUT SHORT EARED CAN
HANGER, HAS TEN 91V LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER
DAMPING STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS
REMEMBER TO TELL US ROUND OR OVAL!!
|
£12.76 |
 |
STRAPY LASER CUT SHORT EARED CAN
HANGER, HAS YAMAHA LASER CUT OUT OF STAINLESS AND INCLUDES THE RUBBER
DAMPING STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS
REMEMBER TO TELL US ROUND OR OVAL!!
|
£12.76 |
|
|
STRAP LASER CUT SHORT EARED CAN
HANGER, PLAIN LASER CUT STAINLESS AND INCLUDES THE RUBBER DAMPING
STRAP. COMES IN OVAL OR ROUND AND WILL FIT MOST 110MM DIAMETER CANS REMEMBER
TO TELL US ROUND OR OVAL!!
|
£8.51 |
